How to Prevent Problems Caused by Humidity at Home

Humidity in the house, along with other factors specific to steam condensation, harms walls, ceilings and floors. So below we will give you some tips that will help you both to solve them and to prevent them, all with the purpose of reducing the need to commission larger works for their reappearance.

Control the Temperature

Maintaining a temperature that is neither too low nor too high for humidifier uses in winter is essential in order to avoid the humidity that comes out at home, as well as the appearance of mold stains and physical damage to the walls, either due to humidification’s due to water leaks or humidity due to capillary action.

The main characteristic of this type of humidity is that it is located on the interior faces of the walls and extends homogeneously through them, which can cause flaking, discoloration of paints and coatings, stains, molds and fungi. In wood it is seen as swelling and in metallic elements as oxidation, among other damages.

A very high humidity is also particularly unpleasant at higher temperatures because the cooling of the body through evaporation of sweat then becomes ineffective; the body has to make more sweat (profuse sweating) and is still insufficiently cooled.

There are Various Influences on Air Humidity in Living Rooms:

Water vapor is constantly released into the room air, e.g. B. on the breath and skin of people, through plants and when cooking and showering. This alone would lead to an ever-increasing humidity.

On the other hand, visit HouseholdAir for air humidity is removed from the house through the exchange of air with the environment (ventilation), usually through window ventilation.

Some building materials (e.g. untreated wood, lime, plaster or brick) and other objects (e.g. books, upholstered furniture, curtains, carpets) can store a relatively large amount of moisture, i.e. H. Absorb water vapor when the humidity is high and then release it again when the humidity is lower. This reduces the fluctuations in air humidity.

In new buildings that are not yet fully dry and after major renovations, significant amounts of moisture can escape from the building materials. This increases the air humidity and often requires increased ventilation (e.g. over a heating period).

In order to avoid moisture damage and health risks, the relative air humidity should at least never exceed 60%, at least in houses without thermal insulation of the outer walls. If there are strong thermal bridges, there can be moisture problems well below 60% humidity.

Turn off Household Appliances that Produce Humidity in the House Well

Special attention with home clothes dryers, most people are not aware that leaving the dryer lid open after finishing its respective cycle or leaks in the hose, emit enormous amounts of steam, harmful to any structure that the surrounds.

Maintain Sunlight Inputs in the Rooms

It is a proven fact that mold spreads more frequently in areas with little sunlight, so maintaining good natural lighting in each room reduces the spread of harmful fungi and bacteria, along with the famous black spots that form. between the ceramics on the floor and walls.

Focus the Problem Early

It is vital not to let the proper indications of water leaks due to humidity (such as dripping, stains, paint chips, among others) go unnoticed and continue to grow.

The wetland effects can only be definitively eliminated if we identify the area of ​​its origin in time. Failure to detect it safely can result in serious damage that could be very damaging to the aesthetics and the surrounding environment, so it is prudent to call an expert who can locate, contain and ultimately repair the damage.

Detect Humidity Odors at Home and How to Eliminate Them

In every house there will always be areas more prone to having an unpleasant odor, which could be an indication of possible water leaks.

It is common that even after the filtration of the capillary pores in the wall stops, the strong odor continues. This is the product of residual condensation that has already permeated the area.

Treatment of the area with special cleaning products containing: Water, boric acid, vinegar and hydrogen peroxide, together with their respective ventilation, usually eliminates the problem in a matter of a few days.